• ZAGE-D-ESAU3
      5x SATA Drives to eSATA and USB3.0
      Features:
        •Supports SATA I, SATA II, and SATA III Hard Drives
        •Supports eSATA I, eSATA II, eSATA III, USB2.0 and USB3.0 host connection
        •Supports Hot-swapping
        •12 LED Pin Headers for Hard Drives and Power
        •Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transfer rate
        •OS independent
        •Supports individual drive mode via eSATA* or USB connection
        •independent drive configuration is supported via eSATA only when connecting to controllers that are Port Multiplier compatible
        •USB chipset：JMicron JMS567
        •eSATA chipset：JMicron JMB572
    • ZAGE-D-ESAU3-R
      5 SATA Drives to eSATA and USB3.0 with Hardware RAID Adapter
      Features:
        • Support SATA interface 3G backward compatibility.
        • Support SATA1,SATA2,SATA0,SATA3,SATA4 5 pcs 7P SATA connector.
        • Support ESATA1 1 port Esata 7 pin 90 deg connector.
        • Use JMicron JMB393 chip RAID Port Multiplier design,support RAID level:0/1/3/5/10/JBOD/CLONE(Use JMicron HW RAID Manager GUI control).
        • Support USB1 1 port USB3.0 B type 9 pin 180 deg connector for USB3.0 bus link .
        • Use JMicron JMS567 USB3.0 chip design.
        • Support J3 1 pcs floppy power 4-pin connector.
        • Support SW1 piano dip switch for raid mode setting and buzzer enable and auto rebuilding to spare drive.
        • Support SW2 1 pcs tach switch for raid setting button and buzzer mute.
        • Support J1 2X6pin 90 deg 2.54mm header for SATA phy link and access external LED use.
        • Support J2 2x6pin 90deg 2.54mm header for JMB393 ic error external LED use.
        • Support J4 1X2 pin 90deg 2.54mm header for external reset switch use.
        • Support BZ1 1 pcs buzzer for JMB393 RAID mode alarm mode beep.
    • ZAGE-D-4SA4ES
      Build-to-Order - Internal SATA to eSATA Device Adapter
      Features:
        • Centronic bracket for device
        • Convert 4 internal SATA L-type ports to 4 external SATA (eSATA) I-type connectors
    • ZAGE-D-5SAES-PM
      Build-to-Order - eSATA Port Multiplier 1:5 Device Adapter - SATA III (6Gb/s)
      Features:
        • Support SATA 3.1, with connunication speeds of 1.5Gbps. 3.0Gbps, and 6.0 Gbps on host and device ports.
        • PHY test mode.
        • Full scan for high-production test coverage and PHY self-test
        • One 6 Gbps SATA host port, Five 6 Gbps SATA device ports.
        • Support 25 MHz reference clock.
        • 115200 bps UART access.
        • Spread-spectrum clocking transmission.
        • SATA BIST over host and device links.
        • Supports asynchronous notification
        • SPI interface for internal register programming.
        • Supports SATA Port Multiplier Rev 1.2
        • Hot Plug Support
        • Marvell Chipset
    • ZAGE-D-4SA70
      Build-to-Order - Multilane to 4xSATA Device Adapter
      Features:
        • Centronic bracket for device
    • Page:
    • All Data:12
      Add : 8F., No.207-1, Sec. 3, Beixin Rd., Xindian Dist., New Taipei City 23143, Taiwan (R.O.C.)  Tel: +886-2-8913-2350   Fax: +886-2-8913-2325  E-mail : sales@an-hsin.com.tw
      Copyright © 2012 Anhsin-Tech Technology Co., Ltd All Rights Reserved.   SITEMAP